电工钢磁性检测方法国家标准应用问题和解决方案

通过对电工钢交流磁性检测方法现行国家标准（爱泼斯坦方圈法和标准单片法）在应用中存在的问题进行了梳理和解析，认为主要问题包括次级电压波形失真时需修正比总损耗、约定的有效磁路长度并非实际有效磁路长度以及磁性测量系统校准方法缺失等，并提出了采用数字反馈控制技术控制次级电压波形无需修正比总损耗、取向硅钢单片法测量时采用475 mm有效磁路长度以及磁性测量系统综合校准方案等一些解决方案。     

Three stage creep behavior of MgO containing ordinary refractories in tension and compression

In service tensile and compressive stresses occur in refractory linings, these stresses lead to creep of refractories. Ordinary refractories experience creep of the primary stage and may further proceed to the secondary and tertiary creep stage. For the development of advanced material models for finite element simulations it is necessary to investigate the creep behavior in all three creep stages under tensile and compressive loads. Hence, two advanced high temperature uniaxial creep testing devices, applying a wide range of tensile and compressive loads, were used to determine the three creep stages in a reasonable time under service related loading conditions. The Norton–Bailey creep equations and an inverse identification procedure were applied for the evaluation of the experimental results. A magnesia refractory was studied at elevated temperatures and its respective creep parameters for each stage were determined. The stress dependency on the creep behavior can be seen clearly on the creep curves and the corresponding creep parameters. Furthermore, a comparative study of creep parameters and creep rates was performed between the magnesia refractory and a magnesia-chromite refractory. The results demonstrate the significant asymmetrical creep behavior in tension and compression for both materials. The creep investigation in this paper favors the requirement for consideration of the three stage creep behavior and the asymmetrical creep behavior in thermomechanical modelling activities of industrial vessels.     

Computer Network Assisted Test of Spoken English

With the development of computer network technology, the means of foreign language teaching have changed. Computer aided spoken English test is a new test method, and there is a great advantage compared with the traditional oral test. In order to further understand the superiority of the computer aided spoken English test, this study took the sophomores of Foreign Language Department in Henan University of Chinese Medicine, China, as the subjects and carried out the traditional interview-type spoken English test and computer-assisted spoken English test. The score system based on Hidden Markov Model (HMM) was used, and then the two tests were carried out. The performance in the two tests was compared, and the attitudes of the participants to the computer assisted Spoken English test were analyzed in the form of questionnaires. The results showed that the computer aided spoken English test could better reflect the true level of the students, and the teachers and students clearly stated that the computer aided spoken English test could relieve tension and reduce the burden of teachers. The research verified the feasibility of the computer-assisted spoken English test, which provides a reference for the promotion of the computer-assisted spoken English test.     

A side-sensitive synthetic coefficient of variation chart

Control charts for monitoring the coefficient of variation (γ) are useful for processes with an inconsistent mean (μ) and a standard deviation (σ) which changes with μ, by monitoring the consistency in the ratio σ over μ. The synthetic-γ chart is one of the charts proposed to monitor γ, and its attractiveness lie in waiting until a second point to fall outside the control limits before a decision is made. However, existing synthetic-γ charts do not differentiate between the points falling outside the upper control limit (UCL) and lower control limit (LCL). Hence, this paper proposes a side-sensitive synthetic-γ chart, where successive nonconforming samples must either fall above the UCL or below the LCL. Formulae to compute the average run length (ARL), the standard deviation of the run length (SDRL) and expected average run length (EARL) are derived using the Markov chain approach, and the algorithms to obtain the optimal charting parameters are proposed. Subsequently, the optimal charting parameters, ARL, SDRL and EARL values for various numerical examples are shown. Comparisons show that the side-sensitive synthetic-γ chart consistently outperforms the existing synthetic-γ chart, especially for small shifts. The proposed chart also consistently outperforms the Shewhart-γ chart, while showing comparable or better performance than the Exponentially Weighted Moving Average (EWMA) chart for most shift sizes, except for very small shifts. Finally, this paper shows the implementation of the proposed chart on an industrial example.     

Observations of Membrane Domain Reorganization in Mechanically Compressed Artificial Cells

Giant unilamellar vesicles (GUVs) are considered to be the gold standard for assembling artificial cells from the bottom up. In this study, we investigated the behavior of such biomimetic vesicles as they were subjected to mechanical compression. A microfluidic device is presented that comprises a trap to capture GUVs and a microstamp that is deflected downwards to mechanically compress the trapped vesicle. After characterization of the device, we show that single-phase GUVs can be controllably compressed to a high degree of deformation (D=0.40) depending on the pressure applied to the microstamp. A permeation assay was implemented to show that vesicle bursting is prevented by water efflux. Next, we mechanically compressed GUVs with co-existing liquid-ordered and liquid-disordered membrane phases. Upon compression, we observed that the normally stable lipid domains reorganized themselves across the surface and fused into larger domains. This phenomenon, observed here in a model membrane system, not only gives us insights into how the multicomponent membranes of artificial cells behave, but might also have interesting consequences for the role of lipid rafts in biological cells that are subjected to compressive forces in a natural environment.     

A comparison of visual ability and its importance awareness between novice and experienced drivers

The visual ability factors of peripheral perception, visual reaction and visual pursuit ability are important for safe driving. Thus, this study explored the influence of driving experience on these visual ability factors. Sixty-five drivers, including novice and experienced drivers, participated in this study. The visual ability levels of the three factors were measured by the Vienna Test System. In addition, driver's awareness of the three factors' importance for safe driving was measured by questionnaire items. Results showed that out of the three factors, drivers' peripheral perception ability was correlated significantly with their driving experience. Experienced drivers had higher peripheral perception ability than that of novice drivers. In addition, compared with novice drivers, experienced drivers believed that peripheral perception was more important whereas visual reaction was less important. It is suggested that higher attention should be paid to peripheral perception in driving training and novice drivers should increase their importance awareness for this factor.     

Preparation and electrochemical characterization of Ti-based amorphous metallic glass with high strength

Ti-based amorphous metallic glasses have excellent mechanical, physical, and chemical properties, which is an important development direction and research hotspot of metal composite reinforcement. As a stable, simple, efficient, and large-scale preparation technology of metallic powders, the gas atomization process provides an effective way of preparing amorphous metallic glasses. In this study, the controllable fabrication of a Ti-based amorphous powder, with high efficiency, has been realized by using gas atomization. The scanning electron microscope, energy-dispersive spectrometer, and X-ray diffraction are used to analyze surface morphology, element distribution, and phase structure, respectively. A microhardness tester is used to measure the mechanical property. An electrochemical workstation is used to characterize corrosion behavior. The results show that as-prepared microparticles are more uniform and exhibit good amorphous characteristics. The mechanical test shows that the hardness of amorphous powder is significantly increased as compared with that before preparation, which has the prospect of being an important part of engineering reinforced materials. Further electrochemical measurement shows that the corrosion resistance of the as-prepared sample is also significantly improved. This study has laid a solid foundation for expanding applications of Ti-based metallic glasses, especially in heavy-duty and corrosive domains.     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.     

虚实结合的可穿戴产品适合性检验研究

目的 为了更科学地研究和检验可穿戴产品的适合性,提出一种适合性检验方法,能够精确保留现实环境中的产品佩戴关系,并能将现实与虚拟的适合性检验研究相结合,得到合理的适合性检验结果.方法 以虚拟现实眼镜的适合性检验为例,通过高精度的三维测量技术将现实环境中的人、产品以及人—产品佩戴关系转化为三维虚拟信息,并以人—产品佩戴三维模型为参考基准对齐人和产品的虚拟模型,得到保留现实佩戴关系的人—产品佩戴模型组,再应用偏差分析法得出人—机佩戴区域的可视化适合性结果和统计数据,结合主观评价方法进一步分析产品的适合性.结论 虚实结合的产品适合性检验方法可在虚拟环境中高精度地保留现实环境中的人—产品佩戴关系,并能得到可视化的适合性检验结果,为检验和指导产品的适合性提供依据.